Holybro M10 GPS Standard GPS (GHR 1.25mm 10pin)

Description:

The Holybro M10 GPS, powered by the u-blox M10 series, is a multi-constellation GNSS receiver capable of receiving and tracking various GNSS systems simultaneously. Thanks to its multi-band RF front-end architecture, it can concurrently receive signals from all four major GNSS constellations: GPS, Galileo, GLONASS, and BeiDou.

Additionally, it is equipped with the IST8310 compass, a tricolored LED indicator, buzzer, and safety switch. It offers three different connector options to serve various purposes. The module is configured with a baud rate of 115200 at 5Hz.

Its high-gain 25 x 25 mm patch antenna delivers superior performance, and its omnidirectional radiation pattern provides greater flexibility in device installation. The module includes active circuitry for the ceramic patch antenna and a rechargeable backup battery for warm starts.

Firmware support for the M10 GPS includes PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0, or later versions.

Features:

1. Newest Ublox 10th Gen GNSS
2. Fast & Accurate Positioning
3. High-gain 25*25*4mm antenna
4. IST8310 Compass
5. Internal Buzzer, Safety switch
6. Ultra Bright UI RGB LED
   

   Specification:

   Parameter	Details
   GNSS Receiver	Ublox M10
   Multi-GNSS Support	Supports up to 4 GNSS systems including BeiDou
   Supported GNSS Systems	Galileo, GLONASS, GPS, QZSS
   Frequency Bands	GPS L1 Galileo E1 GLONASS L1 BeiDou B1 SBAS L1 QZSS L1
   Compass	IST8310
   Output Protocols	UBX (U-blox), NMEA
   Position Accuracy	2.0 m CEP
   Navigation Update Rate	Up to 25 Hz (Single GNSS) Up to 10 Hz (4 Concurrent GNSS)
   GNSS Augmentation Systems	EGNOS, GAGAN, MSAS, WAAS QZSS (L1S)
   Default Baud Rate	115200
   Input Voltage	4.7 – 5.2 V
   Port Type	JST-GH-10P
   Antenna	25 × 25 × 4 mm Ceramic Patch Antenna
   Power Consumption	Less than 200 mA @ 5 V
   Operating Temperature	-40°C to 80°C

   Package Includes:

   1x M10 GPS Module
   1x Fixed Carbon Fiber GPS mount

   Holybro M10 GPS Standard GPS Overview

   The Holybro M10 GPS Standard GPS (GHR 1.25mm 10pin) is a high-precision GNSS receiver module designed for Pixhawk and Pix32 flight controllers. It provides reliable multi-constellation positioning by concurrently tracking GPS, Galileo, GLONASS, and BeiDou signals, making it ideal for UAV navigation and robotic applications.

   Key Features of Holybro M10 GPS Standard GPS

   • Multi-Constellation GNSS: u-blox M10 chipset tracks GPS, Galileo, GLONASS, and BeiDou simultaneously for robust positioning.
   • Integrated IST8310 Compass: Built-in digital compass ensures accurate heading data without an external module.
   • High-Gain Patch Antenna: 25 × 25 mm antenna delivers superior signal reception even in challenging environments.
   • Tricolor LED & Buzzer: Visual and audible indicators for fix status and safety alerts.
   • Safety Switch: Quick power-off capability to prevent accidental operation during maintenance.
   • Versatile Connectivity: GHR 1.25 mm 10-pin connector and two alternative ports support seamless integration.
   • Preconfigured Baud Rate: defaults to 115200 bps at 5 Hz for easy setup with popular autopilots.
   • Fast Shipping from Zbotic: Get genuine Holybro modules delivered across India without delay.

   Applications and Use Cases

   • Drone Flight Control: Precision GPS for fixed-wing and multirotor UAVs using Pixhawk/Pix32.
   • Autonomous Ground Robots: Reliable positioning for path planning and obstacle avoidance.
   • Surveying and Mapping: Accurate geotagging for aerial photogrammetry and land surveys.
   • Search & Rescue Operations: Robust location data in remote or obstructed environments.
   • Model Aircraft Navigation: Improved waypoint accuracy for RC planes and gliders.
   • Educational Robotics: Hands-on GNSS integration in university and maker projects.

   How to Use Holybro M10 GPS Standard GPS

   Mount the module’s patch antenna with a clear sky view, then connect the GHR 1.25 mm 10-pin cable to your Pixhawk or Pix32 autopilot’s GPS port. The module ships preconfigured at 115200 bps and 5 Hz update rate—simply enable the external GPS in your flight controller firmware, calibrate the compass via the ground station software, and verify LED and buzzer indicators for a valid GNSS fix.

   • Genuine Products: All items sourced from authorized distributors
   • Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
   • Free Shipping: Free delivery on qualifying orders
   • COD Available: Cash on Delivery, UPI, cards, net banking
   • Technical Support: Expert help for setup and troubleshooting
   • Easy Returns: Hassle-free replacement for defective products

   Frequently Asked Questions

   Which autopilots are compatible with Holybro M10 GPS?

   The M10 GPS standard module is designed for Pixhawk and Pix32 flight controllers. It works with ArduPilot, PX4, and other firmware that support an external GNSS via a 10-pin GHR connector.

   How do I confirm the compass is calibrated?

   After connecting the M10 GPS, enter your ground station’s compass calibration routine. The integrated IST8310 compass will appear as an internal heading source—rotate the module as prompted until calibration completes.

   Can I adjust the update rate or baud rate?

   Yes, you can reconfigure the u-blox M10 settings using u-center software via a UART-to-USB adapter. By default it’s set to 115200 bps at 5 Hz, but you can increase the rate or change communication parameters as needed.