4.9G-5.8G 2.5W VTX + F4 F405 Flight Control & 60A 4IN1 ESC Stack For Mark4 APEX XL Long Range FPV Frame Drone 4.9G-5.8G 1.6W / 2.5W VTX + F7 F722 / F4 F405 Flight Control & 60A 4IN1 ESC Stack For Mark4 APEX XL Long Range FPV Frame Drone
₹13,445.00
In stock
In stock
Description
F4 F405 Flight Controller:
Product Parameters:
MCU: STM32F405RGT6 168MHz
Gyroscope: MPU6500/ICM42688 (send it at random)
Baro:Bmp280/DPS310 / SPL06-001/ LQTP001HTA (send at random)
OSD: Betaflight SPI OSD DJI HD OSD(UART5)
Black box: 16MB
6x Uarts: UART 1/2/3/4/5/6
4x PWM outputs
1x I2C
2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 12V indicator(Red)
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)
1x JST-SH1.0_6pin connector (9V/GND/T5/R5/GND/R2)
VTX 12V filtered power
DJI FPV OSD is supported by any spare UART
LED: 4 LED independent pads, support WS2812 programming lamp output.
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,
The default receiver input is UART2(You can solder ELRS RX on UART2).
Power:
Input voltage: 3-6S
BEC: 5V/12V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
LDO 3.3V: Max.1A
FC Firmware:
BetaFlight firmware: DAKEFPVF405
INAV firmware:DAKEFPVF405
Mounting:
Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
External size 36mm × 36mm
Flight control weight: 6.9g
Flight control onboard voltage sensor.
Model: Ultra2500 VTX 4.9G-5.8G 2.5W
Model: Ultra2500 2.5W VTX Input voltage: DC 7-36V(2-8S Battery) Output: 5V@600mA(Power 5V to camera) Input impedance: 75Ω Protocol: IRC Tramp Antenna connector: MMCX connector Cable connector: GH1.25-6P connector Output power: 25mW/400mW/800mW/1500mW/2500mW/Pit mode Frequency tables: 64 CH Video format: PAL / NTSC Microphone: Built in microphone Size: 36.5mmx36.5mmx12mm Weight: 15g(without cable) Mounting holes: 30.5mmX30.5mm(M3) Features 1. 2.5W super-power ,suitable for Long Range flight with good stability. 2. Six power levels: 25mW/400mW/800mW/1500mW/2500mW/Pit mode . 3. Two-layer board cooling structure,separate power BEC and main-board,reducing and shielding from the insinal interference. 4. Temperature control protection function that can prevent high temperature burning. 5. Wide voltage input, supports 7V-36V voltage input. 6. VTX control protocol is IRC Tramp,supports OSD parameter adjustment. 7. VTX built in microphone,real-time return of Drone's sounds. 8. Has 3 regional frequency tables to meet the needs of various regions. 9. One function buttons, three indicator lights, easy to operate. 10. Mounting holes is 30.5mmx30.5mm. Support IRC Tramp Protocol UltraFPV VTX supports the IRC TRAMP protocol and the modification of video transmission parameters through the remote control, including frequency, working power and so on. NOTE: For BetaFlight flight controller firmware above BetaFlight 4.1.0,you need upload a VTX Table to the flight controller before using the remote control to modify the video transmitter parameters normally. ULTRA2500_VTX_25W.json For the use of the video transmitter table, please refer to this article "How to Setup Betaflight VTX Table – SmartAudio Tramp VTX Control"
60A BLHeli-S 3-6S DShot600 4-in-1 ESC:
Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
Power supply voltage: 3-6S (12-26V)
Continuous working current: 60A
No built-in 5V BEC output
Firmware: BLHeli-S
Screw hole spacing: 30.5*30.5MM
Aperture: 4MM
Weight: 14.6g
– The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.
– EMI Shell provides stronger anti-interference capability.
60A BLHeli-S 3-6S DShot600 4-in-1 ESC:
Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
Power supply voltage: 3-6S (12-26V)
Continuous working current: 60A
No built-in 5V BEC output
Firmware: BLHeli-S
Screw hole spacing: 30.5*30.5MM
Aperture: 4MM
Weight: 14.6g
– The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.
– EMI Shell provides stronger anti-interference capability.
Customer Reviews
Only logged in customers who have purchased this product may leave a review.


Reviews
There are no reviews yet.